Page 5 of 8
Re: 1:32 FDNY Seagrave Towerladder in progress
Posted: Mon Nov 19, 2018 12:32 am
by Hazmat
Re: 1:32 FDNY Seagrave Towerladder in progress
Posted: Mon Nov 19, 2018 12:46 am
by Hazmat
Re: 1:32 FDNY Seagrave Towerladder in progress
Posted: Mon Nov 19, 2018 1:06 am
by Hazmat
so the next, a little more complex, part was the further completion of the basket pipe system.
Since i want to have it moveable it was a bit tricky to get the right angle to have the pipe tilting properly (ok still not 100% accurat, but fine for me
)
- 07082018 (16) (Large).JPG (200.46 KiB) Viewed 7506 times
followed by some further details for the basket like the scene light boom (out of a 1,5mm round styrene rod and l-shape leftovers) and the small ladder on the back of the basket.
- 07082018 (14) (Large).JPG (233.57 KiB) Viewed 7506 times
- 16092018 (54) (Large).JPG (241.5 KiB) Viewed 7506 times
with this done, the first paintcoat for the extendable boom segments, the ladders and the basket followed
- 16092018 (74) (Large).JPG (315.41 KiB) Viewed 7506 times
- 16092018 (74)_2 (Large).jpg (234.6 KiB) Viewed 7506 times
Re: 1:32 FDNY Seagrave Towerladder in progress
Posted: Mon Nov 19, 2018 1:28 am
by Hazmat
Re: 1:32 FDNY Seagrave Towerladder in progress
Posted: Mon Nov 19, 2018 1:43 am
by Hazmat
Re: 1:32 FDNY Seagrave Towerladder in progress
Posted: Mon Nov 19, 2018 1:51 am
by Hazmat
Re: 1:32 FDNY Seagrave Towerladder in progress
Posted: Mon Nov 19, 2018 3:55 am
by CCFR-45
Coming along really nicely!
Thanks for sharing
Re: 1:32 FDNY Seagrave Towerladder in progress
Posted: Sun Dec 02, 2018 7:02 am
by Dfdeng44
Nice.
Re: 1:32 FDNY Seagrave Towerladder in progress
Posted: Tue Jul 02, 2019 11:21 am
by Hazmat
Hi everbody, yes this build continues
since my last post i left the truck aside for a while, but i picked it up the last three months and was rather building than posting something
But now a little progress with the making of the boom control panel on the turntable.
I therefore used some remainings of the diamondplate pieces of the 10 truck as well as some thin wire and a clear yellow plastic sheet as worklight cover.
Re: 1:32 FDNY Seagrave Towerladder in progress
Posted: Tue Jul 02, 2019 11:41 am
by Hazmat