Fire Apparatus Model Forums

Posted: **Tue Sep 18, 2018 11:48 am**

Hi everbody, another quick update on this project

One important thing for the basket was the water gun, which i have created next.
The steps were basically the same as for the pipe system; "thermoformed" small clear acrylic rods, added some polysterol rods in smaller diameter as well as polysterol pipes in larger diameter. I even reused the remaining leftover of the Engine 68 deck gun (which i dissasembled for the tiller ladder).

: 16092018 (28) (Large).JPG (301.08 KiB) Viewed 115898 times

: 16092018 (29) (Large).JPG (243.27 KiB) Viewed 115898 times

: 16092018 (32) (Large).JPG (291.17 KiB) Viewed 115898 times

: 16092018 (41) (Large).JPG (215.72 KiB) Viewed 115898 times

: 16092018 (42) (Large).JPG (198.85 KiB) Viewed 115898 times

Posted: **Tue Sep 18, 2018 11:53 am**

And to finish this small update;

One important thing for the basket was the water gun, which i have created next.
The steps were basically the same as for the pipe system; "thermoformed" small clear acrylic rods, added some polysterol rods in smaller diameter as well as polysterol pipes in larger diameter. I even reused the remaining leftover of the Engine 68 deck gun (which i dissasembled for the tiller ladder)

.

: 16092018 (2) (Large).JPG (283.31 KiB) Viewed 115898 times

: 16092018 (3) (Large).JPG (311.45 KiB) Viewed 115898 times

: 16092018 (4) (Large).JPG (317.19 KiB) Viewed 115898 times

: 16092018 (5) (Large).JPG (232.44 KiB) Viewed 115898 times

: 16092018 (8) (Large).JPG (200.33 KiB) Viewed 115898 times

: 16092018 (15) (Large).JPG (214.85 KiB) Viewed 115898 times

Posted: **Tue Sep 18, 2018 4:51 pm**

Amazing

Posted: **Tue Sep 18, 2018 11:35 pm**

Hazmat wrote: ↑
Tue Sep 18, 2018 11:53 am
And to finish this small update;

„One important thing for the basket was the water gun, which i have created next.
The steps were basically the same as for the pipe system; "thermoformed" small clear acrylic rods, added some polysterol rods in smaller diameter as well as polysterol pipes in larger diameter. I even reused the remaining leftover of the Engine 68 deck gun (which i dissasembled for the tiller ladder) .“

Oops wrong text

The last pictures show how i changed the appearance of the emergency lightbars simply by using self adhesive chrome foil as rotators. Ohne very little detail that bothered me with all the diamond plate FDNY Seagraves ever since. Especially the all over red „rotators“ with the clear dome.

Posted: **Wed Sep 19, 2018 8:15 pm**

Fantastic work my friend. I'm glad to see you're still working on it.

Thanks for sharing

Posted: **Thu Sep 20, 2018 11:43 am**

Thanks for your feedback!

CCFR-45 wrote: ↑
Wed Sep 19, 2018 8:15 pm
Fantastic work my friend. I'm glad to see you're still working on it.

Thanks for sharing

Yes i´m still working on it!

And since i´m trying to create as much details as possible, it quite often got out of hand, and i´ve wasted so much time for something that went into the bin

Allthough i would like to have every small detail working and not just attached to the model (especially WORKING lights

), i´ve finally realised that overall this is just a model for display and doesn´t have to "work" on a daily basis

Even though, there we will be a lot of working features once it´s done for sure

Posted: **Sun Sep 23, 2018 12:54 am**

Detail is good! I'm amazed at your patience. I don't have the patience or skill for something like that.

Posted: **Sun Nov 04, 2018 1:41 am**

Amazing skills.

Posted: **Mon Nov 05, 2018 5:35 pm**

CCFR-45 wrote: ↑
Sun Sep 23, 2018 12:54 am
Detail is good! I'm amazed at your patience. I don't have the patience or skill for something like that.

Dfdeng44 wrote: ↑
Sun Nov 04, 2018 1:41 am
Amazing skills.

Thank you again

I‘m a bit further with the progress on this project, just haven‘t had the time to post it properly here, but this will follow the next few days

Posted: **Mon Nov 19, 2018 12:24 am**

"I‘m a bit further with the progress on this project, just haven‘t had the time to post it properly here, but this will follow the next few days

"

...Ok it´s been a bit more than just a few days

, but i was more in the contruction than the posting mode

So at least a lot more progress with this build!
The next pictures show the further completion of the ladder turntable by adding 1mm styrene sheet stripes to the frame and the beginning of the pipe system.