Building progress LACoFD Lifeguard Ford F-350

Post by **Hazmat** » Thu Apr 29, 2021 2:11 pm

Hi again,
following you see the building steps to my latest project.
This time I again used the 1:43 scale 2008 Ford F-250 from New Ray.

: LACOFD_LG (8) (Large).JPG (249.06 KiB) Viewed 2562 times

since I made a seperate topic with the replacement of the tires, I skip the part for this build

So at this stage I already cut the rear bed away and shortened the driver cabine.

: LACOFD_LG (21) (Large).JPG (314.49 KiB) Viewed 2562 times

: LACOFD_LG (26) (Large).JPG (296.72 KiB) Viewed 2562 times

Fits perfect already

...

and the cabine parts glued together

: LACOFD_LG (2) (Large).JPG (292.69 KiB) Viewed 2562 times

: LACOFD_LG (3) (Large).JPG (284.35 KiB) Viewed 2562 times

Post by **Hazmat** » Thu Apr 29, 2021 2:18 pm

Next was the cardboard mock up for the rear compartment section.

: LACOFD_LG (4) (Large).JPG (291.33 KiB) Viewed 2561 times

: LACOFD_LG (5) (Large).JPG (268.37 KiB) Viewed 2561 times

measurments were ok, so the 1mm styrene sheet version followed.
First all parts cut out

: LACOFD_LG (17) (Large).JPG (375.31 KiB) Viewed 2561 times

: LACOFD_LG (20) (Large).JPG (236.45 KiB) Viewed 2561 times

Post by **Hazmat** » Thu Apr 29, 2021 2:25 pm

Meanwhile I also had modified the towing hitch

: LACOFD_LG (7) (Large).JPG (300.38 KiB) Viewed 2560 times

: LACOFD_LG (6) (Large).JPG (279.62 KiB) Viewed 2560 times

: LACOFD_LG (22) (Large).JPG (268.87 KiB) Viewed 2560 times

After punching holes into the compartment doors for the handles, the base rear compartment frame was done.

: LACOFD_LG1 (30) (Large).JPG (227.57 KiB) Viewed 2560 times

: LACOFD_LG (23) (Large).JPG (254.38 KiB) Viewed 2560 times

: LACOFD_LG (24) (Large).JPG (266.5 KiB) Viewed 2560 times

Post by **Hazmat** » Thu Apr 29, 2021 2:33 pm

After reenforcing the compartment frame, the rear section base was done.
I even incorporated small 2mm bolts into the base for better attachment to the chassis

: LACOFD_LG (32) (Large).JPG (270.87 KiB) Viewed 2560 times

: LACOFD_LG1 (48) (Large).JPG (319.26 KiB) Viewed 2560 times

: LACOFD_LG (33) (Large).JPG (258.86 KiB) Viewed 2560 times

: LACOFD_LG (34) (Large).JPG (253.63 KiB) Viewed 2560 times

Post by **Hazmat** » Thu Apr 29, 2021 2:49 pm

With this done I started to create the racks for the surfboard and the stretcher basket.
After several unsuccessful attemps of cutting "free hand" angled frames in the past

, I this time choosed to make a subframe or guideframe

to get the correct angles for the racks

: LACOFD_LG (35) (Large).JPG (307.91 KiB) Viewed 2560 times

: LACOFD_LG (37) (Large).JPG (299.77 KiB) Viewed 2560 times

: LACOFD_LG (38) (Large).JPG (283.1 KiB) Viewed 2560 times

For the racks I used 1x2 mm strip styrene and L-shape strips as mounting feet.

: LACOFD_LG (39) (Large).JPG (279.57 KiB) Viewed 2560 times

and checking if the racks fit

: LACOFD_LG (41) (Large).JPG (275.1 KiB) Viewed 2560 times

: LACOFD_LG (42) (Large).JPG (262.54 KiB) Viewed 2560 times

Post by **Hazmat** » Thu Apr 29, 2021 2:59 pm

Speaking of the surfboard, this onefollowed next

I basically drew a free hand shape onto some cardboard and traced it onto a 1mm styrene sheet, once happy with the shape. The small fin was simply created by cutting a small triangle out of 0,5 mm styrene and filing a small notch with a round file into it. Finally I rounded the edges and bent the piece to achieve the surfboard appearence.

: LACOFD_LG (43) (Large).JPG (261.14 KiB) Viewed 2560 times

: LACOFD_LG (44) (Large).JPG (243.83 KiB) Viewed 2560 times

: LACOFD_LG (45) (Large).JPG (255.86 KiB) Viewed 2560 times

: LACOFD_LG (46) (Large).JPG (273.17 KiB) Viewed 2560 times

Post by **Hazmat** » Thu Apr 29, 2021 3:07 pm

The next step was to modify the regular mirrors to the extended version as used with the utility/commercial versions.
Since I already explained the steps with my FDNY HazTac und NYPD ESU unit, here just the pictures of the progress.

: LACOFD_LG (49) (Large).JPG (284.67 KiB) Viewed 2560 times

: LACOFD_LG (50) (Large).JPG (245.48 KiB) Viewed 2560 times

: LACOFD_LG (51) (Large).JPG (274.38 KiB) Viewed 2560 times

: LACOFD_LG (52) (Large).JPG (258.54 KiB) Viewed 2560 times

After this the paintjob followed.

: LACOFD_LG (53) (Large).JPG (233.22 KiB) Viewed 2560 times

Post by **Hazmat** » Thu Apr 29, 2021 3:13 pm

With the paint on, I completed the mirrors.

: LACOFD_LG (54) (Large).JPG (273.45 KiB) Viewed 2560 times

: LACOFD_LG (55) (Large).JPG (228.41 KiB) Viewed 2560 times

: LACOFD_LG (56) (Large).JPG (241.33 KiB) Viewed 2560 times

And an overview of the model so far.

: LACOFD_LG (57) (Large).JPG (252.85 KiB) Viewed 2560 times

: LACOFD_LG (58) (Large).JPG (242.02 KiB) Viewed 2560 times

: LACOFD_LG (59) (Large).JPG (241.44 KiB) Viewed 2560 times

Post by **Hazmat** » Thu Apr 29, 2021 3:23 pm

Since the main bodywork was done,I now concentrated on the details.
Starting with the front pushbar, out of black 0,5 mm styrene, 1,5 mm styrene rods, tubes and 2mm U-shape rods.