Re: 1/64 Pierce Dash CF Tower Ladder Build Along
Posted: Sun May 10, 2020 1:26 am
Looking at the white cab above what I would do would be to make a plug that would fit right into the windshield opening from the outside. Leave it just a bit small so that the clear plastic would be flush with the outside of the cab. You could build up the plug using a block of wood, sanding the corners round to fit the cab contours. This plug could then be used as the buck for the clear. Once the buck is made I'd paint it and make it as smooth as I could. This way there will be no imperfections in the clear plastic as it forms. I'll send you an e-mail.