Search found 221 matches
- Wed Feb 14, 2024 2:03 pm
- Forum: Fire Modeling
- Topic: 2021 Pierce Ascendant Tower
- Replies: 28
- Views: 13522
Re: 2021 Pierce Ascendant Tower
Got some building time in today with the storm and all. Work continues.
- Sat Feb 10, 2024 2:11 am
- Forum: Fire Modeling
- Topic: 2021 Pierce Ascendant Tower
- Replies: 28
- Views: 13522
Re: 2021 Pierce Ascendant Tower
Downtime? Whazat??
- Wed Jan 31, 2024 3:34 am
- Forum: Fire Modeling
- Topic: 2021 Pierce Ascendant Tower
- Replies: 28
- Views: 13522
Re: 2021 Pierce Ascendant Tower
With the casting done I gave each a coat of Molotow chrome using the 1 and 2 pens. Not a bad result on bare resin. The lenses are done but will not go in until the bezels are mounted on the cab. Clears in the ones with the turn signal attachments and red for the warning lights that go above them. 07...
- Mon Jan 29, 2024 4:53 pm
- Forum: Fire Modeling
- Topic: 2021 Pierce Ascendant Tower
- Replies: 28
- Views: 13522
Re: 2021 Pierce Ascendant Tower
I'm making a new mold for the headlights. Not included in the first go around were the corner lights that were next to the headlights at the round corners. So I made a new lens bezel with the attached corner light and will cast it for both sides using this one as the master. 002.JPG Here's the first...
- Fri Jan 26, 2024 3:24 pm
- Forum: Fire Modeling
- Topic: 2021 Pierce Ascendant Tower
- Replies: 28
- Views: 13522
Re: 2021 Pierce Ascendant Tower
The basic cab construction is now complete. The new doors have been built and hung (but will be removed for painting). Interior panels have been made and new windshield glass is done. Making up for all the mistakes on the first cab! Bumper done, new headlight bezels cast and the lenses salvaged from...
- Thu Jan 18, 2024 11:29 pm
- Forum: Fire Modeling
- Topic: 2021 Pierce Ascendant Tower
- Replies: 28
- Views: 13522
Re: 2021 Pierce Ascendant Tower
Work progressed on the cab but with initial poor results. Too much in a hurry to do certain things and it got out of hand. So we've started over. 055a.JPG I found lots of little mistakes that really show up if you know where to look. These things happen once in a while. So no crying over spilt milk....
- Sat Dec 16, 2023 2:23 am
- Forum: Fire Modeling
- Topic: 2021 Pierce Ascendant Tower
- Replies: 28
- Views: 13522
Re: 2021 Pierce Ascendant Tower
Here are a couple of shots of the cab as it stands tonite. There is a bit of tweaking to do to clean up little things but it is coming along.
- Tue Dec 12, 2023 4:19 am
- Forum: Fire Modeling
- Topic: 2021 Pierce Ascendant Tower
- Replies: 28
- Views: 13522
Re: 2021 Pierce Ascendant Tower
Got a little paint on the cab. It needs a bit of touchup here and there but some things will clear up with a separation stripe. Duplicolor red and black over gray primer.
- Sun Dec 10, 2023 4:22 pm
- Forum: Fire Modeling
- Topic: Volvo Tanker
- Replies: 6
- Views: 2831
Re: Volvo Tanker
A few things I would have done differently had I done it today. But alas, it was done probably 25 years ago. The portable tank can be set up and unfolded but I wouldn't want to put any water in it!
- Tue Dec 05, 2023 12:52 am
- Forum: Fire Modeling
- Topic: Volvo Tanker
- Replies: 6
- Views: 2831
Volvo Tanker
I did this model a number of years ago basing it on some rigs that were prevalent in the New Hampshire area where I attended a fire training school each fall. The model is 1/32 scale combining a Volvo kit cab and two bodies from a Monogram Mack pumper kit. This was well before I began doing decals o...